INSTALLATION INSTRUCTIONS
Step 6
6. Drill a 8" round hole into the bottom of the cabinet. Drill a 1-1/2
hole into the bottom of the cabinet for the Electrical Access hole.
6a. Pull the round duct & power cord through the bottom of the new
cabinet holes.
Step 7
7. Lift the hood and hang the hood unit on the back wall using screws
drilled in Step 3.
Step 8-9
8. Once the hood is hung to the back wall, remove the baffle filters
from underneath the hood.
9. Drill each of the five pieces of St5 screws (Part C) into the bottom
of the cabinet using the five screw holes at top of the hood.
10. Once the hood is secured into the cabinet, tighten the wood screws
located in the back of the hood. Install Baffle filters back into place.
Make sure hood is secured by pressing on it. Plug unit into power outlet.
9
+
+
8"
ELECTRICAL
ACCESS HOLE
Wall
st5
