To
Replace
Light
Caution
:
LED light can not replace
a
new
bulb
,
r eplace
the whole
LED
light
.
Make
sure
all
the
control
switches
are
off
,
and the r ange
hoods unplugged
!
Take
out
the
fliters
and
cut
off
the
wire
connection
of
the
light, press
the
spring
You
can
replace
a
new
LED
light
unit
no
more
than
rating
!
Then put the light unit to
the
hood
in
reverse
direction
.
Connect the wire
of
Fit on the flters
.
Installation instructions
Preparing the range hood:
1. Open the electrical knockout which is best for your wiring.
2. Fix the shutter to the range hood’s vent; prevent the leakage of oil by
taping the connection with aluminum metal adhesive tape, or duct tape.
3. Attach the ruber support to the back of the range hood.
4. Unscrew and remove the range hood’s bottom cover.
1. Pass the wiring through the electrical knockout hole in the range hood.
2. Put the range hood onto the bottom of the cabinet. Make sure the rear
side is close to the wall, and the hood is equally spaced on each side and
that the top of the range hood is attached to the cabinet. On each side of
the range hood, use 2pcs screws to fix the body to the cabinet.
3. Connect the green wire from power source to the green ground wire on
the range hood. Make the electrical connection by fastening the white wire
line to white and the black wire to black.
4. Reinstall the range hood’s bottom cover and stainless steel baffle filters.
5. Reinstall the oil container.
6. Turn on the power and check the operation of the fans and light.
Important safety instructions
Please follow
below
instructions
:
according
to
the
arrow
direction
,
then y ou
can
take
off
the
LED
light
unit
.
the
lamp
.
16
