![background image](http://html.mh-extra.com/html/amx/vision-2/vision-2_operation-reference-manual_2938882093.webp)
DVB Service
83
Vision
2
Operation/Reference Guide
Scanning for Available Channels
Perform these steps to scan for available channels on all frequencies:
1.
Select
Configure DVB
from the DVB Service Menu on the left pane of the window. The Configure DVB
Service page appears (FIG. 75).
2.
Select the tuner you want to use from the
Tuner Hardware
options menu, and click
Apply
.
3.
Enter the IP address you want to scan in the Address field. This IP address should be the multicast
address of the applicable transmitter.
4.
Enter the port you want to scan in the Port field.
5.
Click
Start
. Vision
2
begins to scan for available channels. Any channels it finds appear in the channels
section at the bottom of the page.
Multicast Settings
The following options are available in the multicast section:
Setting the Multicast Address
Perform these steps to set the multicast address:
1.
Select
Configure DVB
from the DVB Service Menu on the left pane of the window. The Configure DVB
Service page appears (FIG. 75).
2.
Use the
Network interface to multicast on
options menu to indicate which network interface you want
to use for multicasting.
3.
Enter the base multicast address in the Base Multicast Address field. All channels selected to multicast
are offsets from this address.
4.
Enter the port for this channel in the Port field.
5.
Enter a value for the multicast TTL for this channel in the TTL field. This step is optional.
6.
In the Channels area, click the check box in the Multicast column for the channel you want to multicast.
This step changes the multicast value of the channel from false to true. A confirmation pop-up appears.
Click
OK
to accept this change. Repeat this step for each channel you want to multicast.
7.
Click
Apply
.
FIG. 79
Multicast Settings
Multicast Options
Network Interface
Use this setting if the server has multiple network cards and you want to
specify which one is used. This setting does not normally require changing.
Base Multicast Address
All of the channels selected to multicast will be an offset from this address. For
example, if the Base Multicast Address is 234.0.0.0, the first channel on the list
is multicast on 234.0.0.0, and the second 234.0.0.1, etc.
Port
This is the multicast port number to be used.
TTL
This is the multicast TTL value. You can enter a value in the space provided.
Содержание Vision 2
