AMX Vision 2, Руководство по эксплуатации/справочник

Страница: 92 / 128

DVB Service
82 Vision
2
Operation/Reference Guide
The Configure DVB Service page consists of the following sections:
Service Settings
The top section on the page deals with the settings for the service itself and consists of the following options:
Use the Service Name field to enter a unique name for the DVB service. This name appears on the left pane of
the window and always refers to this specific configuration. Always click
Apply
after making any changes.
Tuner Hardware Settings
The second section deals with the selection of the physical DVB tuner used to receive the broadcasts. The
Hardware Tuner option enables you to indicate which tuner you want to use for this service. Always click
Apply after making changes.
Scan for Channels Settings
The third section enables you to scan all of the frequencies used by the broadcaster and detect all of the
available TV channels.
As the scan proceeds, any detected channels display in the Channel List at the bottom of the page.
FIG. 76 Service settings
Service Options
Service Name The name of the service as it appears in the services menu
Apply Click to apply any change to the service name.
FIG. 77 Tuner Hardware Settings
FIG. 78 Scan for Channels Settings
Scan for Channels Options
Address The address you want to scan.
Port The port you want to scan.
Start Start the process of scanning for the available TV channels.
Warning: Any existing list of channels will be deleted.
Stop Stop the scanning process. Only use this if you wish to return later and run the
scan process again, as not all of the channels may have been detected.
The DVB system does not support the decoding of encrypted channels, therefore
encrypted channels are not added to the channel list when they are detected.