![background image](http://html.mh-extra.com/html/amx/vision-2/vision-2_operation-reference-manual_2938882057.webp)
Accessing Servers
47
Vision
2
Operation/Reference Guide
Accessing Servers
Overview
Vision
2
enables you to easily add and manage additional servers in the system. All Vision
2
services are
managed by the Vision
2
ServicesManager web interface.
Starting and Accessing Vision
2
Perform these steps to access your server remotely:
1.
Power on the Vision
2
server. It may take a few minutes to boot.
2.
Test that you can access the server via the LAN. You can run this test by accessing a Command Prompt
using the Ping command. For example:
ping v2AMX-<SVCTAG>
where
<SVCTAG>
is the service name, which you can find on the front of your server. If the server
responds, continue to step 3.
3.
Using a web browser on a PC with network access, navigate to
http://<servername>/admin.aspx
. The
Master Services page appears (FIG. 46).
FIG. 46
Master Services page
Содержание Vision 2
