AMX ViewStat, Инструкция по эксплуатации

Страница: 51 / 76

Set Up and Configuration
45
ViewStat Communicating Thermostat
Set Up and Configuration
The ViewStat has many features that can be adjusted to customize operations. Temperature Control
Set Up , Balance Point Set Up and Communications Set Up , in particular, should only be adjusted
with the help of a qualified service technician.
When first powered up, the Message Display will scroll through the current mode status, fan status,
and Heating/Cooling output status. This is referred to as Passive Display because you do not
interact with it. To get into the set-up menu, press the Enter and Mode buttons simultaneously.
Thermostat Set-Up is menu driven but only again, one menu item is visible at a time. FIG. 32
shows the entire Main Menu. Selecting any one of the Main Menu items (by pressing the Enter
button) will enter a corresponding Sub-Menu. The Scroll Up and Scroll Down buttons are used to
move between menu items or change adjustable values. The Enter button is used to select a menu
item or enter a value. When in Thermostat Set-Up, if none of the three navigation buttons are
pressed in 5 minutes, the display will return to Passive Display.
FIG. 32 Main Menu
to enter User-Interactive display
Use the Scroll Up and Scroll Down
buttons to move between menu items
and change values.
Use to Scroll
Use to Select
Network Override
Set Up Next
Thermostat
Lockout More
Security
Set Up More
Communications
Set Up More
Temperature
Set Up More
Backlight
Set Up More
Balance Points
Set Up More
Display
Set Up More
EXIT
Back
+
Press
to select a menu item or to enter a value Press
Auto - 5 seconds
Message display
Select EXIT to return to the main menu from a
sub-menu.
Select EXIT to return to passive display from
the Main menu.