AMX RMS 3.0 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 104

background image

Concepts

8

RMS NetLinx Programmer’s Guide

Device Values

Each monitored device has a set of values used in its description. These values

are supplied when the device is registered and consist of the following:

Device Values

Device Number

This is the device number of the device, as defined in the NetLinx
program. Devices are tracked by Device ID so this value must be
unique within the devices of a given room. For instance, you can have
multiple "1:1:0" devices as long as there is only one device with a
Device ID of "1:1:0" in the room.

Name

This is the name of device. This name is displayed on the
administrators console and readily identifies the device.

Manufacturer

This is the manufacturer of the device. If this value is not supplied
during registration, the manufacturer of the NetLinx-connected device
will be used.

Model

This is the model number of the device. If this value is not supplied
during registration, the model name of the NetLinx-connected device
will be used.

Device Type

This is the device type of the NetLinx-connected device. This might be
"NI-2000" or "NXP-TPI/4 Touch Panel". This is available for Axcess
and NetLinx devices. This information is registered automatically by
the RMS server.

Serial Number

This is the serial number of the NetLinx-connected Device. This is only
available for NetLinx devices. This information is registered
automatically by the RMS server.

Firmware Version This is the firmware version of the NetLinx-connected device. This is

only available for NetLinx devices. This information is registered
automatically be the RMS server.

Address and
Address Type

This is the physical address and address type for the
Netlinx-connected device. This information describes how the device
is connected to the NetLinx master. A device connected via ICSNet
will display "ICSNet" for the address type and the hardware's network
address for the address. A device connected via IP will display
"TCP/IP" for the address type and the IP address for the address.
Axcess devices will display "AXLink" for both values. This information
may be useful for diagnosing device connectivity problems.
This information is registered automatically by the RMS server.

«
...
14
15
16
17
18
...
»

Содержание RMS 3.0









































































































Отзывы:

Нет отзывов

Похожие инструкции для RMS 3.0

Бренд: Canon Страницы: 106

Vantage Pro2 Updater

Бренд: DAVIS Страницы: 12

Бренд: Garmin Страницы: 6

Controller Mode

Бренд: Sony Ericsson Страницы: 10

FLASH MX 2004 - FLASH LITE AUTHORING GUIDELINES FOR THE I-MODE...

Бренд: MACROMEDIA Страницы: 48

Бренд: IBM Страницы: 481

Бренд: Crestron Страницы: 230

Бренд: Epson Страницы: 6

Stylus Color 600Q

Бренд: Epson Страницы: 1

Stylus Pro - Stylus Color Pro Ink Jet Printer

Бренд: Epson Страницы: 14

Software Film Factory

Бренд: Epson Страницы: 73

Stylus Pro - Stylus Color Pro Ink Jet Printer

Бренд: Epson Страницы: 98

Stylus Color 600Q

Бренд: Epson Страницы: 95

Бренд: Epson Страницы: 209

PowerLite D6150

Бренд: Epson Страницы: 196

BlackArmor WS 110

Бренд: Seagate Страницы: 2

G-DEC 3 MUSTANG FUSE 2-0

Бренд: Fender Страницы: 12

Бренд: JETWAY Страницы: 43

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды