AMX RMS 3.0 Скачать руководство пользователя

Страница: 26 / 104

Upgrading from MeetingManager 1.0

RMS NetLinx Programmer’s Guide

30 seconds, or any value you set using RMSSetCommunicationTimeout (). If a

string is not received within the timeout period, a loss of device communication

is reported to the RMS server.

If you are using RMS CodeCrafter output that imported the custom "Device

communicating" parameter from a MeetingManager 1.0 worksheet, simply

change the Module type for the device from "Custom (No Module)" to "Basic

Device", and delete the "Device Communicating" parameter.

Custom Source Usage

In order to take full advantage of the Source Usage reporting and Manage Source

Usage view, Source Usage must be reported to the RMSSrcUsageMod support

module. The new RMSSrcUsageMod is backwards compatible with the old

module. If you are only using standard sources and you have not customized

MeetingManagerSrcUsageMod module for custom sources, you only need to

change the DEFINE_MODULE line to use RMSSrcUsageMod, recompile, and

download.

If you have customized MeetingManagerSrcUsageMod with custom sources, as

indicated by a value of MM_MAX_CUSTOM_SOURCES greater than 0 in your

customized version of MeetingManagerSrcUsageMod.axs, you will need to

migrate these custom sources to the RMSSrcUsageMod.axs file.

RMSSrcUsageMod supports custom sources in two ways. The first way is the

same as MeetingManagerSrcUsageMod, where you can set

MM_MAX_CUSTOM_SOURCES to the number of custom sources and add

source names to MM_CUSTOM_SOURCES. This method is deprecated in RMS

2.0 although it still works.

The recommended method for adding custom sources to RMSSrcUsageMod is

through custom i!-ConnectLinx actions. RMSSrcUsageMod will watch for the

registration of custom i!-ConnectLinx actions and automatically register any

actions starting with "Select " as a source select. For instance, if your system has

a Reel to Reel player, which is not supported in i!-ConnectLinx as a standard

source, you can track the usage of this source in the RMS server by registering

this as a custom actions called "Select Reel to Reel":

SEND_COMMAND vdvCLActions,'ADD ACTION-1,Select Reel To
Reel,,Sources'

Содержание RMS 3.0









































































































Результаты поиска

Содержание RMS 3.0

Отзывы:

Похожие инструкции для RMS 3.0

Бренды по названию

Популярные бренды

AMX RMS 3.0, Руководство пользователя

Результаты поиска

Содержание RMS 3.0

Отзывы:

Похожие инструкции для RMS 3.0

Бренды по названию

Популярные бренды