Installation
24
RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
Installing RDM Modules into an Enclosure
Installing any of the RDM modules is an easy task. The individual modules are shipped with the four
mounting screws enclosed.
FIG. 23 illustrates the inside of an RDA-ENC6 enclosure and the mounting slots. The modules are
positioned in the appropriate slot and secured using the supplied screws.
The RDA-ENC2 enclosure contains a ground-terminating lug. The RDA-ENC4, RDA-ENC6, RDA-
ENC6B, and RDA-ENC12B enclosures contain a neutral terminating block and a ground-terminating
lug.
To prevent possible personal injury or death, disconnect power to the enclosure
at
the breaker box
before attempting to install any AMX Lighting modules.
FIG. 23
Enclosure module mounting slots and mounting screw holes
Neutral terminal block
Ground terminal block
Module mounting slots
Mounting screw
holes for modules
(4 per slot)
The RE-DM4 and RE-DM6 take up 2 Radia enclosure slots each, so an RDA-ENC6
can hold only three RE-DM4/RE-DM6 devices.
Содержание Radia RE-DM6
