AMX Novara 1000 Series Скачать руководство пользователя страница 8

Страница: 8 / 74

Novara ControlPads

Novara ControlPads & KeyPads

Product Specifications

Novara 1000 Series ControlPads (Cont.)

CP-1016-TR-US

16-Button
ControlPad

Fits NEC-Compliant 3-gang US conduit boxes.

Refer to the

Minimum Internal Clearance for 3-Gang

US Conduit Boxes

section on page 6 for details.

• White: FG1301-16-SW

• Black: FG1301-16-SB

• Brushed Aluminum: FG1301-16-SA

CP-1016-TR-UK

16-Button
ControlPad

Fits standard 3-gang UK conduit box sizes.

• White: FG1301-16-KW

• Black: FG1301-16-KB

• Brushed Aluminum: FG1301-16-KA

Novara 1000 Series ControlPads

Power Requirements:

• Min: 250mA @ 12 VDC

• Max: 420mA @ 12 VDC (with all buttons illuminated to max brightness and 2 external

devices attached to the RELAY 1/2 Ports in the ON state).

Button Layout:

• 8 or 16 buttons

• Blue, backlit buttons with programmable feedback

Max number of events
per ControlPad:

1330

Rear Panel Connectors:

•

RELAY 2

- Output port: can be used to control external devices (i.e. the AMX UPC-20+

Universal Power/Motor Controller - not included).

This is a current sink (not a voltage

driver).

Max current sink - 100mA @12V.

•

SHARED 12V

- 12V.

•

RELAY 1

- Output port: can be used to control external devices (i.e. the AMX UPC-20+

Universal Power/Motor Controller- not included).

This is a current sink (not a voltage

driver).

Max current sink - 100mA @12V.

•

RS232 OUT

- RS232 output port: supports one-way RS-232 control (TX only).

•

GND

- Ground

•

IR OUT

- Connects to an IR Emitter to support one-way IR control (TX only).

•

GND

- Ground

•

INPUT

- Input detection: connects to an external switch (such as a PIR switch), for

detecting a High to Low or Low to High state.

•

-VE

- Connects to the included 12V power supply (-).

•

+VE

- Connects to the included 12V power supply (+).

Top Panel Connector:

1 USB device configuration port.

Supported Baud Rates:

1200 - 115200

Dimensions (HWD):

• CP-1008-US: 4.685" x 2.913" x 1.059" (119 mm x 74 mm x 27 mm)

• CP-1008-UK: 3.386" x 5.787" x 1.059" (86 mm x 147 mm x 27 mm)

• CP-1008-EU: 3.150" x 5.984" x 1.059" (80 mm x 152 mm x 27 mm)

• CP-1016-TR-US: 4.724" x 6.693" x 1.059" (120 mm x 170 mm x 27 mm)

• CP-1016-TR-UK: 3.385" x 8.140" x 1.170" (86 mm x 207 mm x 30 mm)

Weight:

• CP-1008-US: 0.30 lbs (136 g)

• CP-1008-UK: 0.35 lbs (159 g)

• CP-1008-EU: 0.35 lbs (159 g)

• CP-1016-TR-US: 0.55 lbs (249 g)

• CP-1016-TR-UK: 0.65 lbs (295 g)

Included Accessories:

• Button Kit - includes acetate sheet with 50 pre-cut button label inserts and clear plastic Key

Caps

• External 12V Power Supply (57-1301-SA)

Certifications:

• IEC 60950

• FCC/CE

• RoHS compliant

Содержание Novara 1000 Series











































































Результаты поиска

Содержание Novara 1000 Series

Отзывы:

Похожие инструкции для Novara 1000 Series

Бренды по названию

Популярные бренды

AMX Novara 1000 Series, Руководство по эксплуатации/справочник

Результаты поиска

Содержание Novara 1000 Series

Отзывы:

Похожие инструкции для Novara 1000 Series

Бренды по названию

Популярные бренды