Programming
3
NetLinx Integrated Controller (No Master) - Operation Reference Guide
ESC Pass Codes
There are 'escape' codes in the pass mode. These codes can switch the display mode or exit pass mode. The following
'escape' codes are defined.
Program Port Commands (Cont.)
SET IP <D:P:S>
Prompts you to enter a Host Name, Type (DHCP or Fixed), IP address, Subnet Mask, and
Gateway IP address. Enter Y (yes) to approve/store the information in the Master Card.
Entering N (no) cancels the operation.
SET TIME
Prompts you to enter the new time for the Master Card.
When the time is set on the Master Card, the new time will be reflected on all devices in the
system that have clocks (i.e. touch panels). By the same token, if you set the time on any
system device, the new time will be reflected on the system’s Master, and all connected
devices.
This will not update clocks on devices connected to another Master (in Master-to-Master
systems)
SET URL <D:P:S>
Prompts you to enter the URL address and port number. Enter Y (yes) to approve/store the
new addresses in the Master Card. Entering N (no) cancels the operation.
SHOW DEVICE <D:P:S>
Displays a list of all devices present on the bus.
SHOW LOG
Displays the log of messages stored in the Master's memory. The Master logs all internal
messages and keeps the most recent messages. The log contains:
• Entries starting with first specified or most recent.
• Date, Day, and Time message was logged.
• Which object originated the message.
• The text of the message:
SHOW LOG [start] [end]
SHOW LOG ALL
• If
start
is not entered, the most recent will be first.
• If
end
is not entered, the last 20 messages will be shown.
• If
ALL
is entered, all stored messages will be shown, starting with the most recent.
SHOW NOTIFY
Displays a list of devices that other systems have requested input from and the types of
information needed. Note that the local system number is 1061.
SHOW REMOTE
Displays a list of the devices this system requires input from and the types of information
needed. When a NetLinx master connects to another NetLinx master, the newly connecting
system has a device that the local system desires input from; the new system is told what
information is desired from what device. Note the local system number is 1062.
SHOW ROUTE
Displays information about how this NetLinx master is connected to other NetLinx masters.
SHOW SYSTEM
Provides a list of all devices in all systems currently on-line. The system’s lists are either
directly connected to this master (i.e. 1 hop away), or are referenced in the
DEFINE_DEVICE section of the NetLinx program.
You may provide the desired system number as a parameter to display only that system's
information (e.g. SHOW SYSTEM 2001). The systems listed are shown in numerical order.
TCP LIST
Lists all active TCP/IP connections.
TIME
Displays the current time on the Master Card.
URL LIST <D:P:S>
Displays the list of URL addresses programmed in the Master Card.
Escape Pass Codes
Command
Description
+ + ESC ESC
Exit Pass Mode: Typing a plus (shift =) followed by another plus followed by an ESC (the escape key)
followed by another escape exits the pass mode.
The Telnet session returns to "normal".
+ + ESC A
ASCII Display Mode: Typing a plus (shift =) followed by another plus followed by an ESC (the escape key)
followed by an 'A' sets the display to ASCII mode.
• Any ASCII characters received by the device will be displayed by their ASCII symbol.
• Any non-ASCII characters will be displayed with a \ followed by two hex characters to indicate the
characters hex value.
