Decoder Configuration Options
61
N2412A/N2422A User Manual
KVM Page
Click the
KVM
link at the top of any of the main web pages to access the N-Series
KVM
page. You must check the
USB Enable
box at
the top to see the page shown in
for option descriptions.
FIG. 58
KVM Page
Change 802.1x User
Name/Password
Enter a new user name and password to use for 802.1x security. They are used when negotiating a
secure port with the network. These settings are available only when
Configuration
is set to
Simple
.
Custom Config File
Upload a custom
wpa_supplicant.conf
file. See your network administrator for details. This option is
available only when
Configuration
is set to
Custom
.
TABLE 34
Security Page Options
Option
Description
TABLE 35
KVM Page Options
Option
Description
USB Enable
Enable to allow the ability to share mouse and keyboard over the network. Enabled by default. When disabled,
the unit works like a non-KVM unit and ignores any keyboard or mouse activity.
Permission Level
Set the permission level for the Decoder. Decoders can only establish USB connection to Encoders with the
same or higher permission level.
Connect to Encoder IP
Address
Enter the IP address of the Encoder you would like to communicate with through this Decoder. Use the
Switch
button to activate connection and the
Disconnect
button to deactivate it.
KVM Advanced Settings
Enable to access the KVM Encoders list and the related options.