AMX MXR-1001-BL Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 21

AMX MXR-1001-BL Скачать руководство пользователя страница 15

Installing the MXR-1001

16

MXR-1001 - Installation & Hardware Reference Manual

3.

Carefully lift the Motor chassis up so that the top of the chassis fits into the cutout and is flush with the top of the mounting

surface.

4.

Position the Bezel directly above the cutout hole. Verify that the Bezel is oriented correctly relative to the Motor chassis - the

pushbutton is located on the front of the Bezel.

5.

Route the MXR cable from the Bezel through the slot on the front center of the Bezel, and run it through the cutout hole.

6.

Lower the Bezel through the cutout hole and slide it onto the top of the Motor chassis.

7.

Secure the Bezel to the Motor chassis using all 11 supplied mounting screws - there are 3 mounting holes on the front, 4 on

the back, and 2 on each side (FIG. 14):

FIG. 13

Positioning the Motor beneath the Cutout

mounting surface

Motor chassis

(beneath the

Cutout hole

Bezel

(above mounting surface)

front

mounting surface)

«
...
13
14
15
16
17
...
»

Содержание MXR-1001-BL






















Отзывы:

Нет отзывов