Installing the MXR-1001
12
MXR-1001 - Installation & Hardware Reference Manual
Installing the MXR-1001
Overview
Read these instructions in their entirety before beginning the installation. The installation requires specific steps to be performed
the specified order.
CAUTION:
This installation requires specific woodworking skills. Only a professional, AMX-qualified installer should perform this
installation. Installation must conform to all local codes. This product may not be installed by the end-user.
NOTE:
Due to the weight of the MXR-1001, this installation requires
TWO INSTALLERS
.
Required Accessories (Not Included)
Straight-Cut Router bit: Freud 12-128 or Whiteside 1072 (0.5” or 12mm / 12.7mm OD)
Guide Bushing: Woodcraft 144693 (.75” or 19 mm OD)
Bushing Lock Nut: Woodcraft 144696
1) Unbox the MXR-1001 and Remove Shipping Screws
1.
Carefully remove the MXR-1001 from the shipping box and remove packing materials. Note that the MXR-1001 ships with two
Shipping Screws installed on the bottom surface of the Motor (FIG. 7):
2.
Remove the Shipping Screws before installing the MXR-1001.
2) Select a Suitable Location
Ensure that the MXR-1001 will not interfere with the normal use of the work space when installed, both above and below the
mounting surface. For example, ensure that the Motor chassis does not interfere with the user's legs when seated at the table. Also,
ensure that other devices installed in proximity to the MXR-1001 will not interfere with the installation and use of the MXR-1001.
Mounting Surface Requirements
NOTE:
Use the included surface extender for surfaces thicker than 2” (50mm). Refer to the MXR-1001 Hardware Installation Guide
for details.
FIG. 7
MXR-1001 BOTTOM View - remove shipping screws before installation
Above Mounting Surface (HWD):
9.57" x 10.55" x 4.53" (243mm x 268mm x 115mm)
Below Mounting Surface (HWD):
15.37" x 12.04" x 6.78" (391mm x 306mm x 173mm)
Mounting Surface Thickness:
Min: 0.5” (12.7mm) / Max: 2.0” (50mm)
REMOVE SHIPPING SCREWS BEFORE INSTALLING
