manualshive.com logo in svg

AMX MSD-1001-L, Руководство по настройке, Страница: 61 / 100

Поделиться
Скачать
AMX MSD-1001-L Скачать руководство пользователя страница 61

Programming

61

Modero S Series Touch Panels - Configuration & Programming Manual

Button Commands (Cont.)

^DVS

Delete Video Snapshot. Deletes any stored video snapshot associated with the button(s) with the given address(es) and 

state(s). When sent, the affected button(s) will display a black screen in the video button until the button becomes active 

and video starts again.
• Syntax:

^DVS-<addr range>,<state range>

^ENA

Enable or disable buttons with a set variable text range.
• Syntax:

"'^ENA-<vt addr range>,<command value>'"

• Variables:

variable text address range = 1 - 4000.
command value = (0= disable, 1= enable)

• Example:

SEND_COMMAND Panel,"'^ENA-500.504&510.515,0'"

Disables button pushes on buttons with variable text range 500-504 & 510-515.

^FON

Set a font to a specific Font ID value for those buttons with a defined address range. Font ID numbers are generated by the 

TPDesign4 programmers report.
• Syntax:

"'^FON-<vt addr range>,<button states range>,<font value>'"

• Variables:

variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
font value = range = 1 - XXX. Refer to the 

Default Font Styles and ID Numbers

section on page 91.

• Example:

SEND_COMMAND Panel,"'^FON-500.504&510.515,1&2,4'"

Sets the font size to font ID #4 for the On and Off states of buttons with the variable text range of 500-504 & 510-515.

Note: The Font ID is generated by TPD4 and is located in TPD4 through the Main menu. Panel > Generate Programmer's 

Report >Text Only Format >Readme.txt.

?FON

Get the current font index.
• Syntax:

"'?FON-<vt addr range>,<button states range>'"

• Variables:

variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
custom event type 

1007:

 

  Flag   - Zero

   Value1 - Button state number

   Value2 - Font index

   Value3 - Zero

   Text   - Blank

   Text length - Zero

• Example:

SEND COMMAND Panel,"'?FON-529,1'"

Gets the button 'OFF state' font type index information.
The result sent to the Master would be:

    ButtonGet Id = 529 Type = 1007

     Flag   = 0

     VALUE1 = 1

     VALUE2 = 72

     VALUE3 = 0

     TEXT   =

     TEXT LENGTH = 0

^GDI

Change the bargraph drag increment.
• Syntax:

"'^GDI-<vt addr range>,<bargraph drag increment>'"

• Variables:

variable text address range = 1 - 4000.
bargraph drag increment = The default drag increment is 256.

• Example:

SEND_COMMAND Panel,"'^GDI-7,128'"

Sets the bargraph with variable text 7 to a drag increment of 128.

Содержание MSD-1001-L





































































































Отзывы:

Нет отзывов