AMX MSD-1001-L Скачать руководство пользователя страница 48

Страница: 48 / 100

Programming

Modero S Series Touch Panels - Configuration & Programming Manual

Page Commands (Cont.)

@PSP

Set the show effect position. Only 1 coordinate is ever needed for an effect; however, the command will specify both. This

command sets the location at which the effect will begin.
• Syntax:

"'@PSP-<popup page name>;<x coordinate>,<y coordinate>'"

• Variables:

popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.

• Example:

SEND_COMMAND Panel,"'@PSP-Popup1;100,0'"

Sets the Popup1 show effect x-coordinate value to 100 and the y-coordinate value to 0.

@PST

Set the show effect time for the specified popup page.
• Syntax:

"'@PST-<popup page name>;<show effect time>'"

• Variables:

popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
show effect time = Given in 1/10ths of a second.

• Example:

SEND_COMMAND Panel,"'@PST-Popup1;50'"

Sets the Popup1 show effect time to 5 seconds.

PAGE

Flips to a page with a specified page name. If the page is currently active, it will not redraw the page.
• Syntax:

"'PAGE-<page name>'"

• Variables:

page name = 1 - 50 ASCII characters. Name of the page is displayed On. If left blank, the page flips back to the previous page.

• Example:

SEND_COMMAND Panel,"'PAGE-Page1'"

Flips to page1.

SEND_COMMAND Panel,"'PAGE-'"

Flips to the previous page.

PPOF

Deactivate a specific popup page on either a specified page or the current page.

If the page name is empty, the current page is

used (see example 2).

If the popup page is part of a group, the whole group is deactivated. This command works in the same way

as the ’Hide Popup’ command in TPDesign4.
• Syntax:

"'PPOF-<popup page name>;<page name>'"

• Variables:

popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.

• Example:

SEND_COMMAND Panel,"'PPOF-Popup1;Main'"

Deactivates the popup page ’Popup1’ on the Main page.

• Example:

SEND_COMMAND Panel,"'PPOF-Popup1'"

Deactivates the popup page ’Popup1’ on the current page.

PPOG

Toggle a specific popup page on either a specified page or the current page.

If the page name is empty, the current page is used

(see example 2).

Toggling refers to the activating/deactivating (On/Off) of a popup page. This command works in the same way as

the ’Toggle Popup’ command in TPDesign4.
• Syntax:

"'PPOG-<popup page name>;<page name>'"

• Variables:

popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.

• Example:

SEND_COMMAND Panel,"'PPOG-Popup1;Main'"

Toggles the popup page ’Popup1’ on the Main page from one state to another (On/Off).

• Example:

SEND_COMMAND Panel,"'PPOG-Popup1'"

Toggles the popup page ’Popup1’ on the current page from one state to another (On/Off).

Содержание MSD-1001-L





































































































Результаты поиска

Содержание MSD-1001-L

Отзывы:

AMX MSD-1001-L, Руководство по настройке, Страница: 48 / 100

Результаты поиска

Содержание MSD-1001-L

Отзывы: