Modero X Series G5 Touch Panels
9
Modero X® Series G5 Touch Panels - Installation & Hardware Reference Manual
NFC Support
X Series G5 touch panels support Near Field Communications™ (NFC) Technology. NFC technology facilitates making transactions,
exchanging digital content, and connecting electronic devices with a touch. NFC transmissions are short-range (from a touch to a
few centimeters), working with existing contact-less card technologies and containing built-in capabilities to support secure
applications. By using NFC technology, users may receive access to touch panels and touch panel pages through access badges
and other card options.
The maximum range for the NFC antenna is 0.5" (12.7mm), but the typical usage range is 0.25" (6.35mm).
The antenna itself is accessible from the front of the panel, 3.25" (82.55mm) from the left corner of the panel and 0.375"
(9.53mm) from the top edge.
When using an NFC device with the X Series G5 panels, align your device’s antenna with the center of the touch panel’s antenna
(FIG. 5):
Active Video Windows - Limitations
The following limitations apply to the display of active video windows on X Series G5 panels:
NOTE:
The term "Active Video Windows" refers to any "window" on the touch panel (which could be a Page, Popup, Sub-Page or
Button) that is displaying active video content.
Maximum supported number of active video windows displayed simultaneously on the panel:
2
While this limitation is not enforced (i.e the TPDesign5 application will allow you include any number of video windows in
the panel design), attempting to display more than two active video windows at one time may have a negative impact on
the panel’s overall performance.
Maximum supported resolution for video windows:
720dpi
Maximum supported frame rate for video windows:
30fps
Cleaning the Touch Overlay and Case
X Series G5 touch panels come with the MXA-CLK Modero X Series Cleaning Kit (
FG5968-16
), which may be used to clean
fingerprints and dirt from the device. This kit comes with cleaning cloths and a bottle of cleaning fluid specifically for use with the
device.
When cleaning the device,
do not directly spray the device with cleaning fluid
. Instead, spray the cloth and then apply the
cloth to the touch screen.
Do
NOT
use abrasives of any type to clean the device, as abrasives may permanently damage or remove the device’s finish.
Common Access Card (CAC) Support In MXT/D-2000XL-PAN
Card Type
Card Unique Identifier (UID)
Card Data
Personal Identity Verification (PIV) Card holder UID
15693
8 byte UID
Not Supported
N/A
14443A Non-Gov't
4, 7 or 10 byte UID
(1)
Not Supported
N/A
14443A Gov't
4, 7 or 10 byte UID
(1)
Not Supported
(2)
Not currently
14443B Non-Gov't
4 byte UID
Not Supported
N/A
14443B Gov't
4 byte UID
Not Supported
(2)
Not currently
FeliCa
Not Supported
Not Supported
N/A
(1)
The UID can be a fixed unique number or a random number dynamically generated by the card.
(2)
Requires contact card reader (not accessible via NFC)
FIG. 5
NFC antenna location (Tabletop, Landscape and Portrait layouts)
NFC Sensor
NFC Sensor
NFC Sensor
