Using MAX MDL200 and the MAX-MDLD
11
MAX-MDL200 Multi-Disc Loader System
Loading Media to the Target MAX Server
Once all of the disks have been loaded into the MAX-MDLD, you are ready to load DVD and CD media
to the MAX server.
Step One: Verify the Transfer Settings
Before you start, select
File > Settings
to open the Settings dialog (FIG. 3) and set the
Record discs with
multiple matches
option to the desired setting:
If set to
Yes
: Discs that were not positively identified will be transferred. As a result, these
discs will not have any disc information associated with them.
If set to
No
: This option causes the MAX-MDLD to skip transferring any discs that have
multiple title matches, or that are not positively identified. These discs can later be identified
manually, by transferring the same range of discs again. Since MAX MDL200 will not
attempt to transfer any disc that has already been marked as transferred, it will only transfer
the discs that were manually identified.
This is the default (and recommended) setting.
Step Two: Transfer Discs
Once the discs have been loaded into the MAX-MDLD, you can begin the process of transferring the
media:
1.
Set the First Disc/Last Disc range on the targeted drive.
2.
Press the
Record
button to begin transferring (on the drive that you want to use), and let the
MAX-MDLD run until the process is complete.
3.
The status of each disc is indicated in the
Status
column as it is being identified and transferred.
Once complete, the Status message indicates that the media was successfully loaded on the MAX.
Note that the MAX-MDLD loads one disc at a time.
4.
As each disc is read it is automatically loaded to the MAX Server.
5.
MAX MDL200 notifies you when all discs in the specified range have been transferred to the server.
6.
Once the transfer process is complete, you should verify the contents of the MAX server via the
WinMAX application (
Movies
and
Music
tabs).
FIG. 3
Settings dialog
Specify a transfer option
Enter IP Address of the target MAX Server here
You can use the WinMAX application to re-identify any discs that display with
incorrect or incomplete disc information If necessary. You can also use WinMAX to
manually enter/edit disc information as needed. Refer to the WinMAX Instruction
Manual (available online at www.amx.com) for details.
