Using MAX MDL200 and the MAX-MDLD
12
MAX-MDL200 Multi-Disc Loader System
Additional Notes on Transferring Discs
The amount of time it takes to load each disc will vary, relative to the amount and type of data
on the disc. Most DVDs take between 15-45 minutes to load. Audio CDs are typically much
faster.
MAX MDL200 will indicate when the entire process is complete with the "Ready" message in
the Status Bar, as well as a popup window notification.
If One Or More Discs Cannot Be Identified
While MAX MDL200 settings can allow you to proceed with transferring disc images that could not be
positively identified, it is recommended that you set MAX MDL200 to skip discs with multiple matches.
Once the transfer process is complete, these discs can be identified manually by selecting the best title
match for each from the multiple possible title matches found in the database.
1.
Double-click on a title in MAX MDL200 to open the Multiple Matches dialog (FIG. 4).
2.
Specify a search method (
Title
- default setting or
UPC
). Enter the disc title (or UPC code) in the
Search field. The results are displayed in the lower window.
If you selected to search by
Title
, enter part of the title of the desired CD or DVD. For best
results, enter a single word and let the program return a list of all titles that contain that word.
Use a multi-word search to refine the results if necessary.
If you selected to search by
UPC
, enter the UPC code as it appears on the disc packaging (see
FIG. 5 on page 13).
For either search method, avoid using asterisks or other wild-card characters to achieve the
best results.
3.
Click the
Search
button.
4.
Select the best match and click
OK
to assign the selected title (and associated media information) to
the disc.
FIG. 4
Multiple Matches dialog
Double-click on a title to open
the Multiple Matches dialog
Use the
Eject
and
Load
buttons
to eject the disc
momentarily, so you
can discern which of
the possible matches
best describes this
disc. See
Verifying
Disc
Information
for details.
