AMX Massio MCP-108 Скачать руководство пользователя

Страница: 127 / 145

Terminal (Program Port/Telnet) Commands

127

NX-Series Controllers - WebConsole & Programming Guide

Adding a Role

Type

and

<Enter>

at the Security Setup prompt (at the bottom of the Main Security Menu) to add a new role. A sample

session response is:

The following groups are currently defined:

All_Permissions

Studio

User

Enter name of new role:

Enter a name for the group. A group name is a valid character string (4 - 20 alpha-numeric characters) defining the group.

This string is

case sensitive

, and each group name must be unique.

Press <Enter> to display the Edit Group menu.

Default Security Configuration

By default, the NetLinx Master will create the following accounts, access rights, directory associations, and security options.

Account 1: User Name: administrator

Password: password

Role: All_Permissions

Directory Association: /*

Account 2: User Name: NetLinx

Password: password

Role: Studio

Directory Association: none

Role 1: Group: All_Permissions

Rights: All

Directory Association: /*

Role 2: Role: Studio

Rights: Device Management, Firmware Update, Network Management, Security Control

Directory Association: /*

Security Options: USB enabled

Auth on server port (telnet, ftp) enabled

HTTP/HTTPS Services enabled

Telnet/SSH Services enabled

FTP/SFTP Services enabled

ICSP on WAN/ICSLAN enabled

All other options disabled

Access Rights Menu (Cont.)

Option

Description

9) Security Control

Select to allow the role to view and configure security including the following:
• Security settings
• Certificate policy (trusted CAs, etc.) and management (upload, delete)
• LDAP server settings
• Role settings

NOTE:

This permission also includes the right to reboot the Master after the configuration change. It

does not include the right to reboot the Master outside of this context or to reboot any other devices.

NOTE:

This permission is not required to view the information, only to change it.

10) Software Update

Select to allow the role to update firmware and software.

NOTE:

This permission also includes the right to reboot the Master after the update. It does not

include the right to reboot the Master outside of this context or to reboot any other devices.

11) User Management

Select to allow the role to view, create, modify, lock, and remove user accounts.

NOTE:

A user has the ability to change its own password, regardless of whether it has the User

Management permission.

12-15) User Access 1-4

Select to allow the role access generic access permissions. These privileges are to be used by NetLinx

programs.

16) TPAdmin

Select to allow the Master to access a touch panel’s settings page.

17) Remote UI

Select to allow the Master to access Web controls for remote user interfaces, such as Virtual Touch Panel

or Virtual Keypad.

Содержание Massio MCP-108


















































































































































Результаты поиска

Содержание Massio MCP-108

Отзывы:

Похожие инструкции для Massio MCP-108

Бренды по названию

Популярные бренды

AMX Massio MCP-108, Веб-консоль и руководство по программированию

Результаты поиска

Содержание Massio MCP-108

Отзывы:

Похожие инструкции для Massio MCP-108

Бренды по названию

Популярные бренды