![background image](http://html.mh-extra.com/html/amx/axd-ca10/axd-ca10_instruction-manual_2937573059.webp)
Upgrading the Firmware
55
10.4" Touch Panels
17.
Click
Download
to open the Confirm Communication Settings dialog, where you can review
and confirm your Comm Settings and Target Device information before the download begins.
!
Click
Cancel
to return to the Select Axcess Firmware File dialog, to edit these settings
(if necessary).
!
Click
OK
to confirm the Comm Settings and Target Device information, and download
the selected TSK file to the specified device using the selected communications port.
18.
The File Transfer dialog shows the progress of the download. Click
Cancel
to cancel the
download.
19.
Once the TSK file has been downloaded, the 10.4-inch LCD displays the message
"
*Touch To Continue*
".
20.
Touch anywhere on the LCD to return the panel to the Main page (or wait 10-seconds for the
same result).
21.
Reboot the touch panel by cycling power to the unit. This step completes the firmware upgrade
procedure.
Upgrading the Firmware through an IP Address
Before beginning with this section, verify that your 10.4-inch unit is powered and connected to the
NetLinx Master through an AXlink connection.
Use this method if you can only access the
NetLinx Master through an Ethernet connection
.
1.
Obtain the IP Address of the NetLinx Master from your System Administrator, if you do not
have an IP Address for the Master:
!
Follow steps outlined in the
NetLinx Studio
Instruction Manual for either Obtaining or
Assigning and IP Address.
!
From the Online tab of the Project Navigator window, select the NetLinx Master.
!
Press the
Get IP
button from the
Tools
>
NetLinx Diagnostics
>
Networking
tab >
IP Address
section. Note the IP Address and Gateway information.
FIG. 17
Select New 10.4 Firmware File for download page
Selected Firmware file
Device number listing of
Query Online Devices
of detected Axcess devices
detected Axcess devices
allows the user to refresh the list
Device, Port and system
number of panel.
Canceling the firmware download in mid-progress can damage the on-board
firmware.
Содержание AXD-CA10
