![background image](http://html.mh-extra.com/html/amx/axd-ca10/axd-ca10_instruction-manual_2937573026.webp)
Designing Touch Panel Pages
22
10.4" Touch Panels
6.
In the What To Send area, select one or more of the available options (All Bitmaps, All Icons,
All Fonts).
7.
Select the mode of communication with the touch panel (RS-232 and AXlink). Confirm that
the correct panel is selected by verifying the ID values with the Base Address assigned to the
touch panel in the Protected Setup page.
8.
After clicking
Connect
, the Available Panels list appears in the Available Panels field. Click
Begin
to start downloading the project file into the panel.
9.
After completing the download, the bitmaps, icons and fonts that were downloaded are now
accessible via the BITMAPS, ICONS and FONTS menus.
Creating a Bargraph and Joystick
Bargraphs are level monitors and adjustable level controls. These levels can be configured to
monitor and adjust audio outputs and lighting levels.
Joysticks are vertical and horizontal direction controllers you can use for camera for pan and tilt
control. Before starting, make sure to connect the touch panel to your Controller; otherwise, the
joystick will not work properly.
Adding a bargraph or joystick button
Create a new button using the Add operation bar in the
BUTTON
menu.
1.
Press
BUTTON
in the Edit bar to open the
BUTTON
menu.
2.
Press
PROPERTIES
in the
BUTTON
menu to open the
PROPERTIES
operation bar.
3.
Press any button to open the Button Properties page.
4.
Press
BUTTON TYPE
to open the
BUTTON TYPE
menus. Choose a button type to open its
Button Properties page.
Setting Bargraph and Joystick Properties
Use the Button Properties page to set channel, level, and button colors. Refer to the
Setting the
variable text code
section on page 20 and the
Setting the channel code
section on page 19 for
further information. Refer to the
Setting the button colors for channel-off conditions
section on
page 21 for more information on colors for channel-off conditions.
Setting the level code
Level buttons set the device and number codes for the touch panel.
1.
Press
DEV
to open a keypad and set the device number.
2.
Enter 1, 2, 3, or 4 in the keypad. The programming software uses device codes
1 - 4 to identify the touch panel.
3.
Press
ENTER
to save the level device number, close the keypad, and return to the Button
Properties page.
Joysticks use two level numbers. The first is for the X-axis and the second for the Y-
axis. You only need to specify the first level.
Содержание AXD-CA10
