AMX AutoPatch Modula, Инструкция по эксплуатации, Страница: 21 / 191

Overview and General Specifications
15 Modula Instruction Manual
Configuration and Control
The configuration file is stored in the CPU and contains routing and control information for an
AMX AutoPatch Routing System. Each system is programmed (configured) at the factory according to
customer specifications.
Configuration Information
A copy of the custom configuration file is provided on the AMX AutoPatch CD that ships with each
system. The configuration software, XNConnect, is provided on the CD and can be used to further
customize the configuration file (see “Appendix A – Managing Configuration Files” on page 147).
Unless you need to modify your system, you will not need to use any of the configuration software that
is included on the CD. Always make a copy of the configuration file before modifying it.
Configuration file modifications include basic tasks, such as creating local presets, customizing input
and output channel names for control display (e.g., in APWeb’s control interface), as well as advanced
tasks, such as adding or managing hardware. Configuration file modifications are made with
XNConnect, which graphically displays the AMX AutoPatch system and its control configuration.
Other configuration software for specific hardware or for adjusting signal quality is also available on the
AMX AutoPatch CD . For details, see the individual program’s Help file.
Control Options
Modula systems support three different protocols: BCS (as ASCII characters sent through an RS-232
port), XNNet, and TCP/IP. Several different control options are available for Modula systems. Multiple
control methods can be used on the same system.
Front Control Panel or Remote Control Panel
AMX AutoPatch control panels, either front or remote, control a Modula’s switches and attributes.
Although control panels are optional, we recommend one per system for routing verification, redundant
control, and troubleshooting. If the system has a control panel, see the applicable control panel
instruction manual on the
AMX AutoPatch CD or at www.amx.com .
AMX Control Devices
The Modula is compatible with a number of AMX control devices. For control programming
information, see the instruction manual for the specific interface.
Control Software
Modula enclosures can be controlled using AMX AutoPatch software:
APControl 3.0 – for control and scheduling
Uses serial port located on the CPU
Runs on a PC connected to the serial port
Download* from the AMX AutoPatch CD
APWeb Server (TCP/IP) – for control, diagnostics, and third-party access
Uses serial port located on the CPU for connecting to an APWeb Server Module
Accessed through a TCP/IP interface, such as, a web browser (e.g., Internet Explorer)
Contact AMX regarding limitations and conditions for operating an Modula on a
company LAN (Local Area Network)
* If your AMX account has the required permissions, this program can be downloaded from
www.amx.com .