AMX AutoPatch Modula, Инструкция по эксплуатации, Страница: 104 / 191

Stereo Audio Boards
98 Modula Instruction Manual
Specifications Table 4
Applies to CatPro-compatible stereo audio contained in the CatPro RGBHV/HD-15 system listed in
Applicability Table 4 (page 95).
Also applies to these CatPro-compatible stereo audio boards when contained in pre-engineered systems.
AMX reserves the right to modify its products and their specifications without notice.
Specifications Table 4
Parameter Conditions Value
Frequency Response f = 20 Hz to 20 kHz <±0.25 dB
THD+Noise f = 1 kHz, Vin = -10 to +4 dBu <0.06%
Crosstalk f = 1 kHz, Vin = +4 dBu <-95 dB
Signal to Noise Ratio f = 20 Hz to 20 kHz, Vin = +4 dBu >80 dB
Input Level (max.), balanced +8 dBu
Input Impedance 18 kohms
Input Gain Adjustment Range Potentiometer adjustment +6 dB to -6 dB
Output Level (max.), balanced +8 dBu
Output Impedance 50 ohms
Output Volume Adjustment Range Via serial / control panel +10 dBu to -70 dBu (muted)
Type Balanced or unbalanced
Connector Type Pluggable 5-position
terminal block
Compatibility These boards can be used to break
into and out of the CatPro RGBHV
boards.