To exit programming mode with a Default MIDI-
commands’ set – press the button “A/B” for more than 2
seconds, until the LED “A” would be lighting constantly.
So, you can use two sets of MIDI-commands for you to choose. To select the desired one, you have to
enter programming mode and to exit in a proper way.
The selected set is being stored in the microcontroller’s memory and there is no need to set it after
turning on the power.
Initially, MIDI-command programmed set is the same as the Default set.
6
.6 MIDI Commands’ default set
Button
“Channel 1” -- PC#0
Button
“Channel 2” -- PC#1
Button
“Channel 3” -- PC#2
Button
“Channel 4” -- PC#3
Button
“LOOP” CC#15 (CC2 = 64…127 -- LOOP_ON; CC2 = 0…63 -- LOOP_OFF)
Button
“A/B” -- CC#14 (CC2 = 0…63 -- A_ON; CC2 = 64…127 -- B_ON)
Preprogrammed MUTE command is being enabled with the 6th DIP-switch.
MUTE --
CC#7 (CC2 = 64…127 -- MUTE_ON; CC2 = 0…63 -- MUTE_OFF)
Note:
- in the received CC (switching) command, the second data byte (CC2) with a value 0...63 is treated as
0, with a value 64...127 is treated as 127.
- When sending
СС command, the second data byte (CC2) has a value 0 or 127, according to a button’s
state.
Specification
1. Load impedance
8/16 Ом*
2. Main AC Power (universal input) 85~265VAC
3. Weight (without package)
2.85
кг
4. Weight (with package)
3.26
кг
5. Output Power
100 Watt
6. Dimensions:
Width:
480 mm / 19"
Depth:
170 мм
Height:
45 мм/1U
Note:
The amp can be used without a load.
7. Complete set
1. Amplifier SH-100R
1pc.
2. AC main power cable
1pc.
3. User manual
1pc.
4. Warranty card
1pc.
5. Package
1pc.
