Document #120522 Rev-A
14
Peel Off Assembly Tab
Inner Hinge Holes
7. Insert the peel-off assembly tabs into the lower inner cover hinge holes until
they snap into place.
Fig. 16 Peel-off panel installation (I)
8. Reassemble parts in reverse procedures after installing the module.
Fig. 17 Peel-off panel installation (II)
9. Lift up the peel-off panel and snap into place to close.
10. Use a screwdriver to secure enclosure cover screws (9-places).
11. Close the top cover by placing the support arm back into the flute and then
push down the top cover gently
.
Roller
Lower Inner Cover
Lower Cover
Peel-off panel
Roller
