(continued…)
OPERATING IN SELF-LEVELING MODE
To turn the Plumb Dot laser on or off, press the
*
button on the top of
the level.
The level has a self-leveling range of +/- 4 degrees. If the laser is not
within the self-leveling range when operating in Self-Leveling Mode, a
red light will flash on top of the level and the lasers will turn off. To cor-
rect this, adjust the position of the level until the red light turns off.
If the power switch is in the “ON” position, the indicator light is not lit,
and the laser is not on, press the + or
*
button on top of the level to turn
the laser on. If it still does not turn on, verify that the batteries are in
the correct position and that the batteries have sufficient charge.
© Amston Tool Company. All Rights Reserved.
- -
9
