AMSAN AM-FPL9, Руководство пользователя

Страница: 2 / 28

1
IMPORTANT INFORMATION
•
The shipment should be thoroughly inspected as soon as it is received. Any freight
damage or missing items must be noted on the freight bill before signing and reported
to the freight carrier with a freight claim established. Buyer should claim the
compensation from the freight carrier if any damage happens to the equipment during
shipping. Please refer to our website for detailed shipping policies and procedures.
•
Make sure you have additional help or heavy-duty lifting equipment when unloading
and assembling the lift.
•
Read and understand this installation and operation manual entirety before
attempting to install or operate the lift.
Keep this manual near the product for future
references. Make sure all operators read this manual.
•
The lift should only be operated by authorized personnel. Keep children and untrained
personnel away from the lift.
•
Do not make any modifications to the Lift; this voids the warranty and increases the
chances of injury or property damage. •
•
Do not use the lift while tired or under the influence of drugs, alcohol, or medication
•
Manufacturer or distributor assumes no responsibility for loss or damage of any kind,
expressed or implied, resulting from improper installation or use of this lift. Always use
professional installation companies.
•
All persons using the equipment must be responsible, qualified, and carefully follow
the operation and safety guidelines contained in this manual.
•
A level floor is required for proper lift installation and operation.
•
DO NOT install this lift on any asphalt surface. Lift must be installed on concrete
surface a minimum of 12
” thick and 3,000 psi tensile strength with steel or fiber mesh .
Reinforcement. New concrete must be adequately cured by at least 28 days minimum.
•
DO NOT install this lift over concrete expansion joints or cracks. (Consult with your
building engineer)
•
DO NOT install this lift on an upper floor without written authorization from your
building engineer. Should only be installed on a ground floor without a basement.
•
DO NOT attempt to lift only part of a vehicle. This lift is intended to raise the entire body
of a vehicle only. This will bend the arms and void the warranty.
•
NEVER lift any persons or vehicles containing persons. This lift is designed to lift empty
vehicles only.
•
Any vehicle whose weight is above 9,000lb is not allowed to be raised on this machine.
•
All wiring must be performed by a licensed, certified Electrician.
•
Do not perform any maintenance until main electrical power has been disconnected
from the lift and cannot be re-energized until all procedures are complete.
•
Always lower lift to full locked position before getting underneath the lift. Failure to
heed this caution can result in serious injury or death.
•
INSPECT your lift daily. Never operate if it malfunctions or if it has broken or damaged
parts. Repairs should be made with original equipment parts.
•
Never start motor under a load, ensure lift is sitting on locks or on the ground before
commencing to lift a vehicle. Failure to notice this caution can cause motor damage
and void motor warranty.
•
All information in this manual is believed to be correct at time of publication. The
design, material and specifications are subject to change without notice.