NanEye
NanEye Viewer Software
Eval Kit Manual
• PUBLIC
UG001036
• v3-00 • 2022-May-31
43
│ 36
●
The algorithm will adjust the values automatically
●
Color Reconstruction
The color reconstruction options are shown in Figure 52. In order to have a colorful image, please
check the Color Reconstruction checkbox. This will enable the demosaic algorithm, performing the
transformation of a gray to RGB image.
When using a B&W sensor, please uncheck Color Reconstruction feature. Both Color Reconstruction
and Color Pre-Gain ribbons are greyed out and the user will be able to observe a 10-bit image.
Figure 52:
Color Reconstruction
It is possible to tune the image saturation with a slider or through a color matrix for Red (1
st
column),
Green (2
nd
column) and Blue (3
rd
column) channels.
●
Color Adjustment Matrix
●
The default value is 1.2 (does not change the gain of each channel). The sum of the three
boxes values, of each component, is equal to 1, to not change the image overall
brightness
●
To saturate the Red channel, the first row should be changed, increasing the first value
and decreasing the other two values (Green and Blue). These changes can be performed
by pressing “+” and “-” buttons
●
The same procedure can be done for the Green and Blue channels
It also possible to choose the color reconstruction algorithm:
Bilinear1
,
Bilinear2
and
llp
.
●
Frame Processing
Figure 53 shows the Frame Processing tab options.
