AMS AS5601, Руководство пользователя

Страница: 4 / 13

AS5601 Adapter Board
ams Eval Kit Manual, Confidential Page 4
[v1-00] 2014-Jul-31 Document Feedback
Header Pin Symbol Description Info
Mode J1 in 3.3V Mode
J2 2 B Output Pin Quadrature incremental signal B
J2 3 A Output Pin Quadrature incremental signal A
J2 4 PUSH Output Pin Contactless pushbutton function output
4 Adapter Board Description
The AS5601 is connected over the dual-row 2.54mm 4-pin header footprint. Connect the desired
pins of the AS5601 using the headers and resistors.
Figure 1:
Adapterboard Description
5 Mechanical Setup
To set up a contactless potentiometer a magnet holder and a magnet are needed to be used with
the AS5601 position sensor on a PCB. The configuration is shown in
Figure 2 .
I2C pull-up
resistors
Short J1 to
operate in
3.3V mode