AMQ ACTIV-Pro, Руководство по установке

Страница: 11 / 38

ACTIV-PRO INSTALLATION GUIDE | 11
amqsolutions.com
PHASE 6 | Worksurface Mounting
Step 1
To attach the worksurface, start by laying the
worksurface down on the floor with the top down.
Step 2
Lay the base assembly upside down on top of the
worksurface.
Step 3
Double check to ensure that the base is properly
positioned on the underside of the worksurface,
and then attach with wood screws.
NOTE:
The worksurface should be center aligned
with the cantiliver depth and should have equal
amount of overhang on each end.`
ST 5*18 x 2
ST 5*20 x 18
for worksurface
ST 5*20 x 16
for worksurface
T - Type Cantilever C - Type Cantilever
Handset