TM
good tone comes from tweaking . . .
Amptweaker, LLC, P.O. Box 387, Batavia, OH 45103
handmade in USA
www.amptweaker.com
©2010 Amptweaker, LLC
Other Tips & Tricks:
• Effects like compressors, synths, and octavers tend to work
best with the Effects Loop set to Pre.
• Effects like delay, reverb, EQ, chorus, vibe/tremolo, and
most others tend to sound best with the Loop set to Post.
• Try putting an EQ in the Pre/Loop, to experiment with
varying distortion feel, similar to the Tight control
ʼ
s affect.
• By using very low gain/volume settings, the Bass TightDrive
can prevent a small bass amp from having a floppy low end
when it starts to clip the power amp.
• For a really dark, vintage bass tone, turn the Tone and Tight
fully down, Volume up and Gain about halfway.
• Select Pre/Effects Send to use it as a switchable
ʻ
clean
ʼ
send to another effects chain, tuner input or amp.
• Select Post/Effects Send to use it as an auxiliary send to
some other effects or amp AFTER the TightDrive distortion.
• When using extremely high settings on the Tight control,
you might need to increase your amp
ʼ
s bass control.
• To add some dry full range bass, use an auxiliary mixer
with one input connected to the Send....which turns off with
the TightDrive
ʼ
s footswitch.
