How does the work?
Gain
–adjusts the pedal
ʼ
s
distortion. For a cleaner
boost turn this down and
the master up, or crank
for serious overdrive
Tone
–high EQ, set low for
a smoother tone when
overdriving a tube
Volume
–a Master
Volume, you set it
high for clean boost
or use to balance to
bypassed levels
Output Jack
–
connect to the
next pedal
ʼ
s
input or to amp
Tight
– set
higher for an
aggressive,
chunky attack-
lower for thick,
fatter, nastier
distortion
DC Jack
– use
a high quality
regulated
9VDC adapter
with center pin
grounded–will
work with 6V
(compressed)
to 18V(clean
and dynamic).
I like 9V best
In Jack
–from the
bass or previous
effect. The battery
disconnects when
unplugged
True Bypass Switch
–when
bypassed, the bass guitar
signal bypasses all circuitry.
When active, this circuit is
buffered, to avoid signal loss.
