Battery Door
–
The battery
door is held
closed by a
magnet, and
can be opened
just by pulling
sideways
EFX Loop Switch
–selects Pre(before) or
Post(after) distortion position for the Loop.
Compressors sound best on Pre, while
Delays & Reverbs sound better on Post
LEDs–
light up
the knobs if an
adapter is used
Battery Switch
–
This switch turns
off the battery
when not in use-
not active when
using an adapter
Effects Send & Return
– It
ʼ
s
easy to create your own effects
chains using this series loop–
and the added effects track with
the TightDrive
ʼ
s On/Off Switch
Specs:
• Input impedance: 250K Ohm (effect on)
• Output Impedance: 1K Ohm (effect on)
• Current: 11mA with 9V battery, 20mA with 9V adapter(adds knob LEDs)
• Housing: 14 Gauge galvanized steel
• Weight: 2 pounds
• Dimensions: 3.75”W X 5”D X 2”H
• Adapter: 9VDC adapter w/ 5.5mm X 2.1mm positive barrel center ground
