PII-3100 MAINBOARD MANUAL
9
MEMOR
Y CONFIGURA
TION
MEMORY CONSIDERATIONS
The mainboard lets you add up to 1GB of system memory through 4 DIMM
sockets on the board
The four 168-pin DIMM sockets are divided into four banks: BANK 0, 1, 2 & 3.
The speed of all DIMM modules must be 67 - 100 MHz for SDRAM when system bus
speed is set to 66MHz
When system bus speed is set to 100MHz, 100MHz SDRAM is required.
When installing DIMM modules, make sure that Pin 1 of the module must match with Pin
1 of the DIMM socket. Press down firmly until the side clips lock into place.
MEMORY INSTALLATION SETTINGS
BANK#
DESCRIPTION
MEMORY MODULE
0
DIMM1 (168 PIN) 8MB / 16MB / 32MB / 64MB / 128MB / 256MB
1
DIMM2 (168 PIN) 8MB / 16MB / 32MB / 64MB / 128MB / 256MB
2
DIMM3 (168 PIN) 8MB / 16MB / 32MB / 64MB / 128MB / 256MB
3
DIMM4 (168 PIN) 8MB / 16MB / 32MB / 64MB / 128MB / 256MB
