14
POWER MANAGEMENT & PnP/PCI SETUP
POWER MANAGEMENT/APM
Set this option to ENABLED to enable power management and APM features.
SUSPEND MODE
You setup the timer to enter Suspend Mode.
HDD Power Down
You can enable HDD Power Down mode between 1 to 15 mins.
SUSPEND MODE OPTION
PowerOn Suspend Set the system to PowerOn Suspend mode
Suspend to Disk
Set the system to Suspend to Disk mode
VGA ACTIVE MONITOR
You can enable monitoring for VGA activity.
SOFT-OFF BY PWR-BTTN
Instant-off Soft switch - Press ON/OFF for POWER ON/OFF
Delay 4 Sec.Soft switch - Press down for 4sec. to POWER OFF.
EVENT MONITORING
You can set the computer to resume when it detects the following events: alarm, time and
date, IRQ, primary or secondary IDE, floppy disk, serial port & parallel port.
PLUG AND PLAY AWARE OS
Set this option to YES if the operating system in this computer is PnP-aware.
RESOURCES CONTROLLED BY
You can either manually set the PnP resources (I/O Address, IRQ & DMA) used by
legacy ISA devices or have the BIOS automatically set them.
RESET CONFIGURATION DATA
Set to enable to clear the PnP information in ESCD.
IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15, DMA 0, 1, 3, 5, 6, 7
These options allow you to reserve resources for legacy (non-PnP) ISA adapter cards or
PCI/ISA PnP devices.
USED MEM BASE ADDRESS
You can select the MEM block starting address.
USED MEM LENGTH
You can select the MEM block size.
ASSIGN IRQ FOR USB
You can assign a specific IRQ for the USB.
PII-3100 MAINBOARD MANUAL
