AMPTRON M585LMR Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 48

background image

Federal Communications Commission (FCC)

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

q

Reorient or relocate the receiving antenna.

q

Increase the separation between the equipment and the receiver.

q

Connect the equipment onto an outlet on a circuit different from that
to which the receiver is connected.

q

Consult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables and shielded AC power cable must be
employed with this equipment to insure compliance with the pertinent RF
emission limits governing this device. Changes or modifications not
expressly approved by the system’s manufacturer could void the user’s
authority to operate the equipment.

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is subject
to the following conditions:

q

This device may not cause harmful interference, and

q

This device must accept any interference received, including
interference that may cause undesired operation.

Canadian Department of Communications

Canadian Department of Communications

This class B digital apparatus meets all requirements of the Canadian
Interference-causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du
Réglement sur le matériel brouilieur du Canada.

«
1
2
3
4
...
»

Содержание M585LMR

















































Отзывы:

Нет отзывов

Похожие инструкции для M585LMR

Бренд: IEI Technology Страницы: 211

Бренд: IEI Technology Страницы: 8

Бренд: IEI Technology Страницы: 8

Бренд: ASRock Industrial Страницы: 44

Бренд: MSI Страницы: 76

Бренд: Analog Devices Страницы: 24

K8T8AS - REV 3.0

Бренд: JETWAY Страницы: 26

4CORE1600-GLAN/M

Бренд: ASROCK Страницы: 102

Бренд: Gigabyte Страницы: 98

Бренд: Arbor Technology Страницы: 68

Бренд: TransCore Страницы: 40

MIC23031-4YMT EV

Бренд: Micrel Страницы: 8

Бренд: MSI Страницы: 77

Бренд: J&W Страницы: 36

Бренд: MiTAC Страницы: 132

Бренд: NXP Semiconductors Страницы: 19

Бренд: Quantum Design Страницы: 59

Бренд: Quantum Design Страницы: 75

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды