Install the Mainboard
13
Jumper JP5: SPDIF Voltage Out Selector.
This 2-pin jumper lets you select the voltage for the output of the
SPDIF digital audio connector on the mainboard.
Function
Jumper Setting
5 Volts
Short Pins 1-2
0.5 Volts
Open Pins 2-3
Install the Mainboard
Install the mainboard into the system chassis. This mainboard uses
the baby-AT format. However, the board supports an AT and an
ATX power supply so you can use either an AT or ATX system
case. If you use an AT case, some of the ATX power management
features might not function.
Install the mainboard into the unit case. Follow the instructions
provided by the case manufacturer using the screws and mounting
points provided in the chassis.
If you are using a case with an ATX power supply, connect the
power cable from the ATX power supply unit to the power
connector PWR1 on the mainboard.
PWR1: ATX
PWR2: AT
J11
1
FAN2