AMPTRON BKS630E, Руководство пользователя

Страница: 40 / 86

BKS630E
This chapter takes a look inside the system and talks about upgrading certain key
components
Introduction
You probably won’t need the information in this chapter right away, but if you ever plan to
upgrade your system configuration, e.g. adding memory, this chapter shows you how to
open your computer and explains a little about the inside.
If you are unfamiliar with the hardware inside your computer system, this chapter offers a
basic introduction.
Important Precautions
Many of the computer system’s internal components are extremely sensitive to static
electricity. The following techniques reduce the possibility of damaging components with
electrostatic discharge or static.
§
Before handling any components or touching anything inside the system unit,
discharge your body’s static electric charge by touching a grounded surface. Wear a
grounding wrist strap if one is available.
§
Do not take hard drives, memory chips, or the like from their antistatic containers or
bags until you are ready to install them. When removing cards or chips from a system,
immediately place them in an antistatic bag.
§
When handling cards, hold them by their edges, and avoid touching the circuitry.
§
Do not slide cards or ICs over any surface.
§
Limit your movements during installation reduces static electricity.
Warning:
Always disconnect the computer system from AC power before opening
the system unit cover.