AMPTRON BKS630E, Руководство пользователя

Страница: 45 / 86

Upgrading
In this chapter we will limit ourselves to talking about upgrading or changing the CPU,
system memory, and the drives.
Changing the CPU
The Book PC features a Socket-370 for housing the system’s processor. Take care that
you do not try to install a Socket-7 processor such as the Pentium MMX, or the AMD
K5/K6 into the Socket-370, since it will not fit.
The processors are currently supported by the Socket-370: PPGA Celeron/FCPGA
Pentium-III.
Note
: New processors may be released after this manual i s printed
The processor installs into the ZIF (Zero Insertion Force) Socket-370 on the mainboard.
1. Locate the Socket-370 on the motherboard.
2. Pull the locking lever out from the socket and swing it to the upright position.
3. On the processor, identify the pin-1 corner by noting that it has a
slight bevel.
4. On the Socket-370, identify the pin-1 corner. The pin-1 corner is
on the same side as the locking lever, closest to the top of the
lever when it is in the locked position.
5. Match the pin-1 corners and insert the processor into the socket.
No force is required and the processor should drop into place
freely.
6. Swing the locking lever down and hook it under the catch on the
side of the socket. This locks the processor in the socket.
7. The cooling fan installed with processor is necessary, connect the cable from the fan
to the CPU fan power connector CPUFAN1.
Note
: The attached cooling fan is recommended. Whatever, the height of cooling
fan must be less than 22.5mm for the cooling purpose.
8. While power-on your system, press “DEL” key to enter BIOS SETUP.
Pin-1 Corner