14
“TYPE” Button (Second display)
Press this key to change the type of thermocouple in the
second display (K/J/T/E/R/S/N). If the inputs of the main
and second display are the same, then pressing this key
will change the thermocouple type for both displays.
Setup Mode
The following functions can only be use in the setup
mode.
“[LIMITS]” Button (Hi/Lo limit setting)
Press the “
LIMITS
” button to enter the Hi/Lo limit setup
function. The words “
LIMIT
” and “
Hi
” will be flash on the
LCD along with the previous value for the Hi limit.
Enter the new Hi limit value using the number keys
printed in white on the overlay.The resolution of Hi/Lo
limit setup is 1 count. The “
-
” button (same button as
the ESC) can be used to enter negative values. Press the
“
ENTER
” button to confirm the new limit. You will then
be prompted to enter a new Lo limit value. Enter the new
value and then press enter to finish setup of limits.
“[INVT]” Button (Interval time setting)
To setup the time interval for the log function, press
the “
[INVT]
” button. The indicator “
INV
” will blink on
the top-right of the LCD and the previous interval is
displayed. Press the number buttons printed in white
on the overlay to change the time interval. Setting is
from left to right of the following format (HH:MM:SS).
Press the overlay “
ENTER
” button to confirm. To exit this
function, press the ESC button.
HH:
interval Hour (0~23)
MM:
interval Minute (0~59)
SS:
interval Second (0~59)
MAX:
23:59:59
MIN:
00:00:01
