5
NMRR (Normal Mode Rejection Ratio)
NMRR is the DMM's ability to reject unwanted AC noise effect that can cause
inaccurate DC measurements. NMRR is typically specified in terms of dB (decibel).
This series has a NMRR specification of > 60dB at 50 and 60Hz, which is a good and
definite ability to reject the effect of AC noise when making DC measurements.
CMRR (Common Mode Rejection Ratio)
Common mode voltage is voltage present on both the COM and VOLTAGE input
terminals of a DMM, with respect to ground. CMRR is the DMM's ability to reject
common mode voltage effect that can cause digit rattle or offset in voltage
measurements. This series has a CMRR specifications of > 90dB at DC to 60Hz in
ACV function; and > 120dB at DC, 50 and 60Hz in DCV function. If neither NMRR nor
CMRR specification is specified, a DMM's performance will be uncertain.
Analog bar-graph
The analog bar graph provides a visual indication of measurement like a traditional
analog meter needle. It is excellent in detecting faulty contacts, identifying
potentiometer clicks, and indicating signal spikes during adjustments. Analog bar-graph
is not available in AC+DC True RMS Voltage & Current modes.
4) OPERATION
AC Voltage, DC Voltage, DC+AC Voltage, &
Hz Line Level Frequency
In AC Voltage, press
SELECT
button momentarily to toggle between AC and dBm. In
DC Voltage, press
SELECT
button momentarily to toggle between DC, and DC+AC. In
mV Voltage, press
SELECT
button momentarily to select DC, AC, or DC+AC. The new
settings will be saved automatically to the non-volatile memory as power up default. In
DCV and DCmV, press
500000
button momentarily to toggle between 4-4/5 digits and
5-4/5 digits readings. In voltage or current functions, press the
Hz
push button
momentarily to activate or to exit Line Level Frequency measuring function. Line Level
Frequency measuring function is designed especially for noisy electrical high voltage
signals.
Note: In dBm function, power up default reference impedance will be displayed for 1
second before displaying the dBm readings. Press
dBm-
Ω
(
RANGE
) button
momentary to select different reference impedance of 4, 8, 16, 32, 50, 75, 93, 110,
125, 135, 150, 200, 250, 300, 500, 600, 800, 900, 1000, up to 1200
Ω
. The new
impedance value will be saved automatically to the non-volatile memory as power up
default.
