Amprobe AM-140 Скачать руководство пользователя

Страница: 20 / 20

LIMITED WARRANTY

Congratulations! Your new instrument has been quality crafted according to quality

standards and contains quality components and workmanship. It has been inspected

for proper operation of all of its functions and tested by qualified factory technicians
according to the long-established standards of our company.

Your instrument has a limited warranty against defective materials and/or workmanship

for one year

from the date of purchase provided that, in the opinion of the factory, the

instrument has not been tampered with or taken apart.

Should your instrument fail due to defective materials, and/or workmanship

during this one year period, a no charge repair or replacement will be made to
the original purchaser. Please have your dated bill of sale, which must identify

the instrument model number and serial number and call the number listed

below:

Repair Department
ATP – Amprobe, TIF, Promax
Miramar, FL
Phone: 954-499-5400
800-327-5060
Fax: 954-499-5454
Website: www.Amprobe.com

Please obtain an RMA number before returning product for repair.

Outside the U.S.A. the local representative will assist you. Above limited warranty

covers repair and replacement of instrument only and no other obligation is stated or

implied.

P/N: 7M1C-0641-0000

Содержание AM-140





















Результаты поиска

Содержание AM-140

Отзывы:

Похожие инструкции для AM-140

Бренды по названию

Популярные бренды

Amprobe AM-140, Руководство пользователя

Результаты поиска

Содержание AM-140

Отзывы:

Похожие инструкции для AM-140

Бренды по названию

Популярные бренды