UNPACKING AND INSTALLATION
13
D-0115696-C (OM038)
– Otowave 302 Operating Manual
Please note:
Never
insert the probe or the contralateral transducer into a patient’s ear canal without a
suitable ear tip fitted.
The ear tip size is chosen based on the diameter of the
external
ear canal and should suit the patient’s ear but also
provide a comfortable pressure seal.
Ensure that the ear tip is pushed all the way down on the
probe tip and that there is no gab between probe tip and ear
tip.
The small holes through the Otowave probe tip must be kept
clear. If these become blocked a warning message will be
displayed. The probe tip must be cleaned or removed and
replaced.
2.10.
HARDWARE INSTALLATION
The instrument is shipped with the probe attached to the Otowave. The instrument is designed for continuous
operation and is powered by a mains adapter. Connect the output lead from the adapter into the
POWER
input
socket on the back of the Otowave. When power, the indicator on the adapter and the
Power indicator (LED
a)
on the Otowave will both illuminate green, showing that the instrument is ready for use.
If a contralateral transducer was purchased for contralateral reflex testing, connect the transducer to the
CONTRA
socket (2)
on the base unit and fitted.
2.11.
INITIAL SETTINGS
2.11.1.
OPERATING LANGUAGE
The instrument will be set in English by default. To change the operating language (English, German, French,
Spanish, Portuguese or Italian) ensure you start from the
MAIN MENU.
MAIN MENU
Select down
▼
1x
.
Confirm with
►.
CONFIGURATION
Select down
▼
2x
.
Confirm with
►.
SYSTEM SETTINGS
Select down
▼
8x
.
Confirm with
►.
SELECT LANGUAGE
Select language with
▲
/
▼.
Store with
►.
2.11.2.
DATE AND TIME
The Otowave is equipped with a real-time clock. Before use, please set the date & time to local values in
order to ensure that test data and calibration status are correctly identified.
Содержание Otowave 302
Страница 1: ...Otowave 302 Operating Manual...
