AmpliVox Otowave 102-C, Руководство по эксплуатации

Страница: 26 / 45

TRANSFERRING THE RESULTS
21
D-0014930-A
– Otowave 102-C Operating Manual
9. TRANSFERRING THE RESULTS
9.1. SENDING THE RESULTS TO A PRINTER
Amplivox YouTube Video available on how to send results to a printer.
The designated Sanibel MPT-II thermal printer is available as an option and only this printer should be used.
The printer supplied with the Otowave 102-C is correctly configured for communication.
The Sanibel printer has no user-selectable configuration options.
Before attempting to print ensure the printer is fully charged, switched on, loaded with paper and ready to print.
Also ensure the handset is on its cradle.
To print the results of the last test select SEND TO PRINTER from the PROCESS RESULTS menu. (Similar
facilities for printing are available from the VIEW THE LAST TEST and DATA MANAGEMENT options in the
MAIN MENU).
Press
◄ to cancel printing.
The three character identifier for the record is printed in the “Name” field followed by the Otowave graphical
displays, the analysis and the results. The name of the hospital, the department, and the calibration dates for
the instrument may also be printed if required.There is space for additional details to be handwritten by the
clinician (patient name/age, operator & comments).
Thermal paper printouts can fade with exposure to light or heat. Consider transferring the data to a computer
for permanent storage.
9.2. DATA TRANSFER TO NOAH OR AMPLISUITE
To transfer test results stored within the tympanometer to a NOAH database the Amplivox NOAH Impedance
module must be installed on to a computer. Alternatively, Amplivox ampliSuite allows data to be transferred to
a computer and subsequently viewed, annotated & printed. This software is supplied on a USB stick which
includes this operating manual.
Refer to the installation & operating instructions provided with the NOAH Impedance Module or ampliSuite for
further details. In order to use the NOAH Impedance Module the NOAH software must also be installed on the
computer.
If any other messages are displayed while sending data, turn the Otowave off and then on again and try re-
sending the data. If the problem persists contact an Amplivox service centre.