fat
box G3
3.9
SYSTEM STATUS
fat
box G3
MENU OPTIONS
System Status
Main
3G
IPSEC
Ethernet Ports
Firmware Version
Interface
Tunnel
LAN (eth0 + eth 1)
Uptime and CPU load (1,5,15m)
IP Address
SA
fw_G3_2_01
ppp0
10.1.1.1
02:49:06 up 14 min, load average: 0. 22, 0. 13, 0.07
14.100.25.79
Diagnostics:
Log file
Quick Start
LAN Ethernet
WAN Cellular
Port Forwarding
Dynamic DNS
IPSEC VPN
Serial Port
Managment
System Status
Logout
FATBOX G3 has a powerful feature to allow end-
users to write their own custom application
program right on-board the router. This is cost,
space and time efficient – for example, the cus-
tom program can be written to check serial data
read from a PLC and trigger an SMS to a
technician for support or the program can check
for I/O trigger from a relay to reboot the router.
1. Write your LUA program and name it as
‘user.lua’
2. Save the program in \user folder in your
thumb-drive (drive labelled ‘FATBOX’)
3. Insert the thumb-drive into FATBOX (in stable
operating condition)
4. Click ‘Download to FATBOX’, wait 5 sec, remove
thumb-drive
5. You can click ‘Execute Program’ to test you
program
Your user.lua program will automatically be ex-
ecuted after complete boot-up of the FATBOX.
Click ‘Reboot’ to soft reset the FATBOX device.
Cick ‘Factory Settings’ to revert all parameters to
factory default.
WEB
MANAGEMENT
