Amplicom TCL200, Руководство по эксплуатации

Страница: 28 / 65

Settings and Functions
27
4 Settings and Functions
Switching the alarm signal on and off
Activate or deactivate the alarm function by
turning the rotary knob (3). Anticlockwise OFF"
or clockwise ON".
Setting the volume
The alarm and telephone ringer volumes start quietly and
increase to the maximum volume.
Set the alarm volume by turning the volume
rotary knob (4) to the required volume. First of
all, set the volume to a quiet setting and
increase it slowly.
Exposure to the alarm at full volume for a long
period could cause ear damage.
Selecting the acoustic signal
Turn the rotary knob (5) to set the required
acoustic signal.
Setting the pitch
Turn the rotary knob (3) to set the required
pitch for the acoustic signal.
Setting the dimmer
ON OFF
DIMMER
Move the sliding switch (19) to activate the
clock face dimmer. When set to ON", the
brightness of the clock face is automatically
adapted. When set to OFF", automatic
adaptation is switched off.
Selecting the alarm period
1 2 1+2
1+2
Move the sliding switch (24) to select
between the alarm periods. There are three
settings available, from left to right: alarm
period 1", alarm period 2" or alarm periods
1 + 2").
Selecting the type of alarm
MODE
Move the Mode sliding switch (16) to set the
type of alarm with which you want to be
alerted. There are three settings available, from
left to right: vibration only", acoustic signal
only" or acoustic vibration".
Service−Hotline: Tel. 0844 800 6503 (Monday to Friday 9.00 − 17.00)