Temposonics
®
R-Series
V
Analog
Operation Manual
I 54 I
5. The next setting is for output at set point two (end of stroke).
The new value entered in the drop-down box is 19.9 mA.
Confirm your changes by clicking the SUBMIT button.
Fig. 72: Adjusting the output value for set point two
6. The last setting for channel one output is for the error output
value. For this example, the factory default value of 20.7 mA
is changed to 20.5 mA. Confirm your changes by clicking the
SUBMIT button.
Fig. 73: Adjusting the error output value