步骤9：建议客户参考下面的测试参数，对线束进行绝缘电阻测试和耐压测试
Step9：Insulation resistance and dielectric withstand voltage tests are obligated to be done according to below test
parameters to guarantee the good electric performance of the whole harness
9-1
绝缘电阻测试
9-1
Insulation Resistance Test
位置
Positions
测试电压
Test Voltage
测试时间（推荐）
Test Time（recommended)
绝缘电阻
Insulation Resistance
电缆芯线到壳体
Cable(power) to shell
1000 VDC
5S
> 500 MΩ
电缆芯线到高压互锁
Cable(power) to HVIL
1000 VDC
5S
> 500 MΩ
高压互锁到壳体
HVIL to shell
1000 VDC
1S
> 100 MΩ
9-2
耐压测试
9-2
Dielectric Withstand Voltage Test
位置
Positions
测试电压
Test Voltage
测试时间（推荐）
Test Time（recommended)
漏电流
Leakage Current
电缆芯线到壳体
Cable(power) to shell
5000 VDC
10S
<5mA
电缆芯线到高压互锁
Cable(power) to HVIL
5000 VDC
10S
<5mA
HVIL to shell
高压互锁到壳体
500 VDC
1S
<5mA
04/05
9-3
测试说明
:
警告
:
建议的电气测试及其参数应根据终端应用要求进行审查，以确保安全性并防止损坏其他部件。提供的参
数是基于
PowerLok
连接器和其峰值
1000VDC
额定。提供的测试参数可能超出电缆组件或设备上使用的其他部
件
/
材料的限制。
9-3
Test note:
caution: Recommended electrical tests and their parameters should be reviewed against end
application requirements to ensure safety and to prevent damage to other components. Parameters
provided are based on the PowerLok connectors and their peak 1000VDC rating. Test parameters
provided may exceed the limit of other components/materials used on the cable assembly or device.
将密封圈推到底
Push the Seal to the bottom
① 屏蔽壳组件
Shielding shell assembly
HVIL 弹片
位置
HVIL
contact
spring
position
PL18X-301-70-G95 单芯直头组装规范 PL18X-301-70-G95 1 POS 180D Plug Assembly Manual
Manual P/N
：
8P1173 _ Rev.01 20221115
