1
PIN 8-COM
PIN 7-24V
PIN 6-Z6
PIN 5-Z5
PIN 4-Z4
PIN 3-Z3
PIN 2-Z2
PIN 1-Z1
PIN 8-COM
PIN 7-24V
PIN 6-Z12
PIN 5-Z11
PIN 4-Z10
PIN 3-Z9
PIN 2-Z8
PIN 1-Z7
+
DC 24V
CON
RLY
TRIG
RLY
PR
ZS
Parts Identification
1. BGM ZONE OVERRIDING INDICATOR
The LED shall it remote paging microphone is active and is overriding the local BGM zone selection. This is active if
Amperes PM1060 paging is used or any other paging microphone console with Priority output signal.
2. FRONT PANEL ZONE SWITCHES - ZONE 1 TO 6
3. FRONT PANELZONE SWITCHES - ZONE 7 TO 12
4. ALL CALL SWITCH
PAGE 2
ZS5601 / ZS5121 | ZONE SELECTOR
All zones will be activated by pressing this switch, regardless of any inactive zone.
Switching for zone 1 to 6.
switching for zone 7 - 12 for ZS5121 only.
2
3
4
ZS 5121
5
6
7
8
9
10
5. DC SUPPLY INPUT PORT
24V DC supply is required to operate this unit. Ensure polarity is correctly terminated to the port. It is recommended that
supply with 1A rating of regulated source is used. Amperes PS9400 is recommended as a DC supply source to your instal-
lation.
6. EMERGENCY OVERRIDE TERMINAL
External switch (eg. fr emergency paging mic with dry contact) can be connected here, which shall trigger the built in relay
when pressed. This shall then provide a dry contact in which would enable the installer to apply several functions such as
providing 24V DC output for volume controller overriding purpose, trigger external device or link to BAS system, etc.
Front View
Rear View
